top of page
Safety training

Stay Safe with Effective Forklift Operator Certification Training

Forklift training is a crucial part of any warehouse or factory worker's education. Not only does it ensure that employees are able to safely and efficiently operate the machinery, but it also helps to avoid potential accidents and injuries.

There are a few different ways to become certified to operate a forklift. Many companies offer on-site safety training, which can be a great option for those who are already familiar with the company's policies and procedures. The single best way for operator certification is in-person training by a qualified, experienced instructor.

Regardless of how you choose to get your forklift training, it's important to make sure that you are thoroughly familiar with the machine before you start operating it. Be sure to ask plenty of questions and take the time to practice in a safe area before you attempt to use the forklift in a real work setting.

OSHA 10 & 30-Hour Training for Construction

If you work in the construction industry, then you know that OSHA 10&30 hour training is a must. This intensive course covers a variety of topics related to safety on the job site and is designed to help workers stay safe on the job.

While the content of the OSHA 30 hour training course is obviously important, the length of the course can also be a concern for some workers. After all, taking 30 hours out of your schedule to complete a training course is no small commitment .

There are also many private companies that offer OSHA 30 hour training, and they can often work with your schedule to find a time that works for you.

No matter how you complete your OSHA 30 hour training, the important thing is that you get it done. The course is an important part of keeping yourself and your coworkers safe on the job, and it is well worth the time and effort to complete.

OSHA 10-Hour Typical Schedule:

  • Introduction to OSHA – 2-Hours

  • Focus Four – Fall Hazards/Struck-by/Caught-in-between/Electrocution – 4 hours

  • Health Hazards in Construction – 1 Hour

  • PPE – ½ Hour

  • Stairways & Ladders – ½ Hour

  • Material Handling – ½ - Hour

  • Fire Safety – ½ Hour

  • Excavations – 1 Hour

Instructors are Certified OTI Instructors through OSHA Outreach Program at UCSD San Diego. OSHA 10 & 30 courses are available in both English and Spanish. Refresher training is recommended every three to four years.

Upon successfully completing the course, you receive a printable certificate and the official Department of Labor OSHA 10 card to carry in your wallet. These courses are an important part of keeping your company and your employees safe on the job, and it is well worth the time and effort to complete. The class size is a minimum of five attendees for onsite training and is available via Zoom delivery.

Construction & Industrial Ergonomics

When you hear the word “ergonomics,” you might think of lifting heavy objects; in truth, ergonomics is much more than that. Ergonomics is about studying your physical abilities and limitations to observe how you can best perform work tasks using various tools, equipment, and materials in your job environment. The goal of ergonomics is to find a good fit between you and the conditions you work in.

Narogate Safety Group Ergonomics course is customized to your scope of work and employee tasks. The course covers causes of MSDs, injury types and prevention measures, stretching exercises, floor and ground activities, overhead work and hazards, material handling and safe lifting procedures, hand-intensive work, and how to minimize injuries and exposures to MSDs in all these areas.

With sprains and strains as the leading cause of workers comp. claims and injuries, this course can help you reduce your claims, injuries, and insurance premiums.

First-Aid/CPR Training

A wound or injury receives first aid to stop the bleeding and clean it to avoid infection and scarring. Additionally, it aids in stopping internal bleeding and shock.

through the EMS, Fire, medical professionals, and hospitals that offer first aid/CPR training. Professionals with training who wish to impart their expertise to others and laypeople looking to make a few bucks are the most frequent suppliers.

First-aid/CPR training can be a lifesaver. All first-aid/CPR training should include instructions on both the recognition and treatment of bleeding, shock, and airway emergencies, as well as common injuries. ***

First aid/CPR is the basic initial response to an emergency. It can be used to treat the effects of bleeding, sprains, burns, and other injuries. Courtesy of the American Red Cross, the acronym for first aid/CPR stands for: “C – Cardio — P — Protective.” There are five major principles of first aid/CPR: 1) airway — open the airway and provide artificial air 2) breathing — give the person CPR until help arrives 3) circulation — establish an adequate blood supply 4) excretions — remove any material that

Sexual Harassment Training/Non-supervisory Employees

Our class is training that meets all annual training requirements for California non-supervisory employees and covers six key topics.

  • California and U.S. Law: Who’s Protected?

  • Legally Speaking: The Two Types of Sexual Harassment

  • Gender Issues at Work: California’s SB 396

  • Abusive Conduct, or Bullying: California’s AB 2053

  • Preventing and Reporting Sexual Harassment: The Active Bystander

  • Retaliation: It is Illegal

  • Written quiz

Fall protection training

Fall protection training is a must for anyone who works at height. It helps to prevent injuries and fatalities in the event of a fall. There are many different types of fall protection systems, and the best one for you will depend on the specific work you do. Some common fall protection systems include guardrails, safety nets, and personal fall arrest systems.

Most fall protection systems are designed to be used with proper safety equipment, such as a harness. It is important to be properly trained in the use of fall protection systems and safety equipment before using them.

If you work at height, make sure you are properly trained in fall protection and have the right safety equipment. It could save your life.

Quipment Operator Training

Equipment Operator Training (EOT) is typically a three to the four-day course where students are taught how to operate the equipment, how to troubleshoot the equipment, and how to operate a research station safely. EOT is administered through the Wildlife Conservation Society–South American Protected Areas (WCSP) by the Amazonian Research Institute for Development (IRD).

The training process is designed to familiarize EOT students with todays safety techniques, communication protocols, and equipment, as well as instill in them a strong conservation ethic. The training is conducted by the Wildlife Conservation Society–South American Protected Areas, IRD, and WCSP.

Training for EOT is usually 2 weeks, 2 days, or 1 day in length, depending on the length of time the program is designed for. It is usually either long-term or short-term, and it is normally conducted during the summer months, the time when the weather is most conducive to outdoor activities.

EOT serves an important purpose by teaching students the fundamentals of operating research stations, operating the research station equipment, and how to conduct science through observation and experimentation. This type of intensive field experience is invaluable to developing the practical observational and experimental skills necessary to conduct science safely.

AWP Certification

The AWP certification, technology was originally developed for construction and the military, but over time it has been adapted for other uses such as agriculture, rescue, and tourism. Over the past decade, technology has started to make its way into the commercial sector. Companies have started to build Aerial Work Platforms for use in factories, warehouses, and other large-scale facilities. The platforms have also been used to provide emergency services, such as rescue and aid, in areas that are inaccessible by other means.

Aerial work platforms are specialized equipment that is used to support workers and equipment on rooftops and other difficult-to-access areas. These platforms, which can come in many different shapes and sizes, have a variety of applications in the construction, forestry, and oil and gas industries. They are also used in other industries, such as the military and farming, to increase efficiency, increase productivity, and improve safety. The latest generation of aerial work platforms, however, can offer more than just support.

Forklift Operator Certification

When you start your career as a forklift operator, you’ll need to pass an exam to prove your knowledge and ability. The exam will help you prove to your employer that you have the ability to safely operate a forklift. This will help you move up the ladder in your career, and gain experience. The certification exam is a multiple-choice test that tests your knowledge of safety, economics, and the forklift.

The world of forklift operation is complex, and a lack of certification can make it difficult for you to find a job. The most common certification is the Forklift Operator Certification, which is offered by the American Alliance of Museums. However, there are other certifications, such as the International Brotherhood of Boilermakers’ Forklift Certification, which are offered by groups such as the International Union of Operating Engineers. Either way, getting certified will help you find a job, and can also open up other career opportunities.

bottom of page